Z CAM E2-F6 Full-Frame 6K Cinema Camera (EF Mount)

Full Frame 6K Cinema Camera

prores raw

  • 12-Bit ProRes RAW recording over HDMI to the Ninja V 5” HDR monitor-recorder
  • 6K @60fps* & 4K @120fps* max, 10-bit color
  • Full Frame CMOS sensor
  • 15 stops dynamic range
  • ZRAW supported
  • EF mount (with optional M, MFT, and PL mount accessory)**
  • Gigabit Ethernet for data, control & live preview


Available on backorder


Shoot professional high-definition cinema footage with the Z CAM E2-F6 Full-Frame 6K Cinema Camera with a Canon EF lens mount. The camera features a full-frame sensor with 10-bit 4:2:2 color support and nominal 15 stops of dynamic range, supports timecode, shoots up to 6K at up to 60 fps, and records data up to 300 Mb/s onto CFast 2.0 media.

Supported recording formats include ZRAW format, which supports 12-bit, MOV and MP4 using H.265 for 10-bit recording, and H.264 which supports 8-bit recording. Its HDMI 2.0 port supports 4K60, 10-bit 4:2:2 video output. Audio is recorded in 24-bit 48 kHz using AAC or PCM (PCM for MOV format only) through its 3.5mm stereo jack or via a separately available XLR connector using its 5-pin LEMO port.

The E2-F6 can be controlled via serial ports, a 2.5mm LANC connector, a USB Type-C port, Ethernet port, or by the Z Camera iOS app to control the camera via Wi-Fi and to view a live image preview and to configure settings. The camera can record time-lapse, slow motion, and can even live stream via its Gigabit Ethernet port. You can also control it locally by the buttons along the side of the camera.

The E2-F6 can be powered by a separately available battery using the built-in L-series battery mount, or you can power the camera using a separately available power adapter using its 2-pin LEMO port. The camera also features a 12 VDC 2-pin LEMO power output to provide power to separately available accessories.

Firmware 0.88

Firmware 0.88 enables ZRAW recording to the camera.

6K Capture and Recording

  • Unburdened by a recording time limit, you can record 6K at up to 60 fps for up to the limit of your recording media’s capacity
  • CMOS sensor with 14 stops of dynamic range
  • The camera supports ZRAW, REC. 709, Z-Log2, FLAT, and HLG
  • ZRAW supports 12-bit recording
  • H.265 (10-bit color) internal recording on CFast 2.0 cards
  • 4K60, 10-bit 4:2:2 video output through HDMI 2.0 is supported
  • Full metal housing for efficient heat dissipation

Interfaces and Expandability

  • USB 3.0 Type-C for camera control and data transformation only
  • Two serial ports for camera control
  • Ethernet port for live view, control, and file transfer to browser or a computer running Z CAM software
  • LANC port for remote control including power on/off

iOS App

Z Camera is a mobile application for camera live preview and control through 5G or 802.11n Wi-Fi. It allows you to start/stop recording and adjust the camera settings remotely, and also has advanced features on camera live preview.

Camera Settings

  • White balance: Auto, preset, manual (2300 to 7500K)
  • Focus modes: MF, AF, CAF
  • Image: Brightness, contrast, saturation, sharpness
  • LUT: REC. 709, Z-Log2, FLAT, HLG
  • Timecode: Current time, manual input

Camera Body

  • Made from aluminum for strength and heat dissipation
  • 2-pin LEMO 12 VDC power output
  • Powers from separately available power adapter or optional L-series batteries

Technical Specifications

Disclaimer: All product features and technical specifications stated are subjected to Z CAM’s sole interpretation and explanation. Specifications are subject to change without notice.


Sensor Type
Full Frame CMOS Sensor
Sensor Size
37.09 x 24.75 mm
Effective Pixels
Dynamic Range
15 Stops
Lens Mount
EF mount (with optional M, MFT, and PL mount accessory)
Built-in Stereo Microphone


Resolution & Max Frame Rate
6064×4040 @30fps max (Open Gate)
6064×3196 @48fps max (6K DCI)
6064×2560 @60fps max (6K 2.4:1)
5760×3240 @48fps max (6K UHD)
5376×4032 @30fps max (5K 4:3)
4848×4040 @30fps max (5K 6:5)
4096×2160 @72fps max (4K DCI) *
4096×1728 @120fps max (4K 2.4:1)
3840×2160 @72fps max (4K UHD) *
1920×1080 @120fps max (FHD)* supersampling / cropping selectable, 4K supersampling is supported at the same frame rates as 6K DCI resolution mode
Video Encoder
ZRAW* / H.265 main 10 profile / H.264 high profile**
* up to 4K @30fps
Bit Rate
300 Mbps max for H.265 & H.264 / 1.2 Gbps for ZRAW
Color Bit-depth
12-Bit ProRes RAW / 12-bit ZRAW / 10-bit 4:2:0 (H.265) / 8-bit 4:2:0 (H.264)
Audio Format
24-bit 48 kHz
Audio Encoder
AAC / PCM (for MOV only)
File Format
Record Mode
Video / Time Lapse Video


Auto, Manual (400 ~ 125000), Dual Native ISO: 400 / 2500
Shutter Speed: Auto, Manual (1”~ 1/8000”) or
Shutter Angle: Auto, Manual (1° ~ 360°)
White Balance
Auto, Preset, Manual (2300K ~ 7500K)
Focus Mode
Brightness / Contrast / Saturation / Sharpness
Image Config
Rec.709 / Z-Log2 / FLAT / HLG
Audio In / Out Level
Time Code
Current Time / Manual Input


File System


HDMI 2.0 Type A (video output up to C4K @ 60fps, 10-bit 4:2:2)
USB 3.0 Type C for camera control & data transfer only
2 x Serial Port
Remote Control
2.5 mm jack socket (Sony LANC compatible)
3.5 mm stereo jack socket (TRS) or 5-pin LEMO port for dual channel XLR microphone (require additional XLR audio connector)
3.5 mm stereo jack socket
5G, 802.11n with external antenna port
Gigabit Ethernet port for control, setting & live streaming


Sony NP-F series compatible, 6.8V ~ 8.4V (Battery not included)
Power Input
DC 6.8V ~ 16.8V (2-pin LEMO socket), with LEMO connector
Power Output (AUX)
DC 12V (2-pin LEMO socket)


Aluminum Alloy
1090g (EF mount) / 1160g (PL mount)
Dimensions (W x H x D)
91.20mm x 99.25mm x 122.25mm (EF mount)
91.20mm x 99.25mm x 133.35mm (PL mount)


Storage Temperature
-20 °C ~ 60 °C
Operation Temperature
0 °C ~ 40 °C



There are no reviews yet.

Be the first to review “Z CAM E2-F6 Full-Frame 6K Cinema Camera (EF Mount)”

Your email address will not be published. Required fields are marked *